Commell LE-37D Bedienungsanleitung

1 LE-37D 3.5 inch Motherboard User’s Manual Edition 1.66 2015/06/26

10 Chapter 2 <Hardware Setup> 2.1 <Connector Location> 2.2 <Jumper Location & Reference> Jumper Function JRTC CMOS Operating/C

11 2.3 <Connector Reference> 2.3.1 <Internal Connectors> Connector Function Remark CPU FCBGA 1170 CPU SO-DIMM 204 -pin DDR3L SO-DIM

12 Support Non-ECC, unbuffered memory only 2.4.2 < CFAST Setup > The board provide one CFAST slot which supports SATA2 interface. The

13 2.5 <CMOS & ATX Setup> The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inappropriate CMOS settings,

14 2.6 <Serial ATA Interface> LE-37D has one SATAII interface, the transfer rate of the SATAII can be up to 300MB/s. 2.7 <Ethernet Interfa

15 Effective patterns of connection: 1-2 / 3-4 / 5-6 Warning: others cause damages Connector: JVLCD (LVDS1 voltage and LVDS2 voltage must be the sa

16 Connector: CN_INV Type: 5-pin LVDS Power Header Pin Description 1 +12V 2 PWM 3 GND 4 GND 5 ENABKL Connector: CN_LVDS Ty

17 every panel has its own pin assignment, so we do not provide a standard cable; please find a local cable manufacture to make cables. LCD Installati

18 Connector: CN_CRT Connector type: 16-pin header connector (pitch = 2.00mm) Pin Number Assignment Pin Number Assignment 1 BR 2 BG 3 BB 4 NC 5 -

19 2.9 <Integrated Audio Interface> The board provides the onboard high definition audio with Realtek ALC262 Connector: CN_AUDIO Type: 10-pin

2 Copyright Copyright 2014, all rights reserved. This document is copyrighted and all rights are reserved. The information in this document is subjec

20 Step2. Configure default BIOS, click Advanced > South Cluster Configuration > USB Configuration, disable “EHCI Mode”. Step3. enable “xHCI

21 Step6. Lastly, the “Setup Complete” screen appears so click “Finish” to restart your computer. The specifications of USB2.0 are list Inter

22 Connector: CN_USB 2/3 Type: 10-pin (2 x 5) header (pitch = 2.54mm) Pin Description Pin Description 1 VCC 2 VCC 3 Data0- 4 Data1- 5 Data0+

23 Connector: COM2 Type: 10-pin (5 x 2) 1.27mm x 2.54mm-pitch header for COM2 Setting RS-232 & RS-422 & RS-485 for COM

24 Jumper: JCSEL1,JCSEL2 Type: 12-pin (6 x 2) & 8-pin (4 x 2) for set COM2 mode jumper 2.12 <PCIe Mini Card and SIM Interface> The

25 Connector: SIMM (3G MiniPcie Mode) Type: 6-pin SIM slot Pin Description Pin Description 1 SIMVCC 2 SIMRST 3 SIMCLK 4 NC 5 GND 6 SIMVPP 7 SIMDA

26 Step 2. Make sure that the cap is now at the OPEN position. Step 3. Flip the cap up for inserting a SIM card into. Step 4. Insert a SIM c

27 Step 6. Press down and slide the cap to the CLOSE position. Be sure that the cap is tightly held with the slot. 2.13 <GPIO and SMBUS Inter

28 Connector: CN_SMBUS Type: 5-pin header for SMBUS Ports 2.14 <Power Supply and Fan Interface > 2.14.1 <Power Input> The board re

29 2.14.3 <Fan connector> The board provides one 4-pin fan connectors supporting smart fan for CPU cooler and system cooler. Connector: CPUFAN

3 Cooler: Heat Sink: (OHSF-5) / (2181010016) (OHS-7) / (2181110009) Printed M

30 2.15 <Switch and Indicator> The JFRNT provides front control panel of the board, such as power button, reset and beeper, etc. Please check we

31 3. Select Speaker Configuration 3.2 <Display Properties Setting> Based on Intel J1900/N2930/E3845 with HD Graphic,

32 2. Click Graphics Properties… button for more specificity setup. 3. This setup options can let you define each device settings. Click Graphics P

33 3.3 <SATA configuration> Chipset SATA Mode: This option can let you select whether the Serial ATA hard drives would work under

34 normal IDE mode or AHCI mode Chapter 4 <BIOS Setup> The motherboard uses the Phoenix BIOS for the system configuration. The Phoenix BIOS in t

35 Appendix A <I/O Port Pin Assignment> A.1 <Serial ATA Port> Connector: SATAII Type: 7-pin wafer connector 1 2 3 4 5 6 7 GND RSATA_T

36 Appendix B <Flash BIOS> B.1 <Flash Tool> The board is based on Phoenix BIOS and can be updated easily by the BIOS auto flash tool. You

37 4. Type the ” fpt64.efi -y -f xxx.bin” command to start flash BIOS processes. ( xxx.bin means the BIOS file that you want to update) 5. When

38 For further information, please refer to NCT6106D datasheet. Appendix D < Programming Watchdog Timer > The watchdog timer makes the system a

39 You can select Timer setting in the BIOS, after setting the time options, the system will reset according to the period of your selection. Contact

4 Index Chapter 1 <Introduction> ...5 1.1 <Product Overview>...

5 2.14.3 <Fan connector>... 29 2.15 <Switch and Indicator>...

6 supports graphics, media performance, flexibility and more enhanced security that is suitable for a variety of intelligent systems the ideal choice.

7 LVDS Interface 2 x Onboard 24-bit dual channel LVDS connector with +3.3V/+5V/+12V supply Audio Interface Realtek ALC262 High Definition Audio Code

8 1.3 <Mechanical Drawing>

9 1.4 <Block Diagram>