Commell LS-573 Bedienungsanleitung PDF herunterladen (Seite 25)

LS-573 User’s Manual

24-

To setup the LCD, you need the component below:

1. A panel with LVDS interfaces.

2. An inverter for panel’s backlight power.

3. A LCD cable and an inverter cable.

For the cables, please follow the pin assignment of the connector to make a cable,

because every panel has its own pin assignment, so we do not provide a standard cable;

please find a local cable manufacture to make cables.

LCD Installation Guide:

1. Preparing the LS-573, LCD panel and the backlight inverter.

2. Please check the datasheet of the panel to see the voltage of the panel, and set

the jumper JVLCD to +12V or +5V or +3.3V.

3. You would need a LVDS type cable.

4. To connect all of the devices well.

For sample illustrator only

Panel side

Board side

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 53 54

Keine Kommentare

Commell LS-573 Bedienungsanleitung Seite 25