Commell LE-575 Bedienungsanleitung Seite 1

LE-575 5.25 inch Embedded Miniboard User’s Manual Edition 1.2 2010/8/4

LE-575 User’s Manual 10 Connector External DB15 female connector on rear I/

LE-575 User’s Manual 11 1.3 <Mechanical Drawing>

LE-575 User’s Manual 12 1.4 <Block Diagram> ICH7-MCompact Flash & IDE 4 x Intel 82574LIn

LE-575 User’s Manual 13 Chapter 2 <Hardware Setup> 2.1 <Connector Location>

LE-575 User’s Manual 14 RJ45_4/3/2/1 CF COM1 USB

LE-575 User’s Manual 15 2.2 <Jumper Reference> Jumper Function JRTC CMOS Operating/Clear Setting J

LE-575 User’s Manual 16 2.3 <Connector Reference> 2.3.1 <Internal Connectors> Connector Functi

LE-575 User’s Manual 17 2.4 <System and Memory Setup> The board provides one 200-pin DDR2 SO-DIMM to

LE-575 User’s Manual 18 2.5 <CMOS & ATX Setup> The board’s data of CMOS can be setting in BIOS. I

LE-575 User’s Manual 19 2.6 <Enhanced IDE & CF Interface> The board supports one enhanced IDE int

LE-575 User’s Manual 2 Copyright Copyright 2009. All r

LE-575 User’s Manual 20 2.7 <Serial ATA Interface> Based on Intel ICH7-M, the board provides two Ser

LE-575 User’s Manual 21 2.8 <Floppy Port> The board provides a slim type floppy port; please use the 26

LE-575 User’s Manual 22 2.9 <Network Interface> The board integrates with four Intel 82574L Gigabit Eth

LE-575 User’s Manual 23 2.10 <Onboard Display Interface> Based on Intel 945GSE chipset with built-in GM

LE-575 User’s Manual 24 2.10.2 <LVDS interface> The board provides one 40-pin LVDS connector for 18-bit

LE-575 User’s Manual 25 2.10.3 <Second LVDS Interface> LE-575X2 only The board provides another 40-pin

LE-575 User’s Manual 26 Jumper: JVINV Jumper: JVLCD Type: 3-pin Power select Jumper Type: 6-p

LE-575 User’s Manual 27 To setup the LCD, you need the component below: 1. A panel with LVDS interfaces. 2.

LE-575 User’s Manual 28 After setup the devices well, you need to select the LCD panel type in the BIOS. The

LE-575 User’s Manual 29 1 2 25 26 2.10.4 <DVI Interface> LE-575XD only The board also comes

LE-575 User’s Manual 3 Serial ATA Ribbon Cable x 1(OALSATA-L) PS2 Cable x 1(OALPS2/KM) Power Output Cable x 1(OALATX-P3S2) Packing List Please check

LE-575 User’s Manual 30 2.10.5 <HDTV Interface> The board provides an HDTV interface with Intel 945GSE

LE-575 User’s Manual 31 2.11 <Onboard Audio Interface> The board integrates onboard audio interface wit

LE-575 User’s Manual 32 Connector: CN_AUDIO Type: 10-pin (2 x 5) header (pitch = 2.54mm) Pin Description P

LE-575 User’s Manual 33 2.12 <USB2.0 Interface> Based on Intel ICH7M, the board provides 8 USB2.0 ports

LE-575 User’s Manual 34 Connector: CN_USB Type: 10-pin (5 x 2) header for USB1/2/3 Ports Pin Description Pin

LE-575 User’s Manual 35 2.13 <GPIO Interface> The board provides a programmable 8-bit digital I/O inter

LE-575 User’s Manual 36 2.14 <Serial Port Jumper Setting > The board provides six RS232 serial ports, w

LE-575 User’s Manual 37 2.15 <Power and Fan Connector> The board comes with a 2-pin DC-Jack & 4-pin

LE-575 User’s Manual 38 2.15.2 <Power Output> The board provides one 24-pin ATX connector for +5V/+12V out

LE-575 User’s Manual 39 2.15.3 <Fan Connector> Connector: SYSFAN Type: 3-pin fan wafer connector Con

LE-575 User’s Manual 4Printer Cable x 1(OALBKU-0) Dual COM

LE-575 User’s Manual 40 2.16 <Indicator and Switch> The JFRNT provides front control panel of the board,

LE-575 User’s Manual 41 (This Page is Left For Blank)

LE-575 User’s Manual 42 Chapter 3 <System Configuration> 3.1 <Audio Configuration> The board integrat

LE-575 User’s Manual 43 3.2 <Display Configuration> Based on Intel 945GSE GMCH with GMA 950(Graphic Media

LE-575 User’s Manual 44 3. This setup options can let you define each device settings. Note: Dual

LE-575 User’s Manual 45 (This Page is Left for Blank)

LE-575 User’s Manual 46 Chapter 4 <BIOS Setup> The motherboard uses the Award BIOS for the system configura

LE-575 User’s Manual 47 (This Page is Left for Blank)

LE-575 User’s Manual 48 Appendix A <I/O Port Pin Assignment> A.1 <Serial ATA Port> Connector: SATA1/2

LE-575 User’s Manual 49 A.3 <Floppy Port> Connector: FDD Type: 26-pin connector Pin Description Pin Descripti

LE-575 User’s Manual 5 Index Chapter 1 <Introduction>...

LE-575 User’s Manual 50 A.5 < Serial Port 3,4,5,6 > Connector: CN_COM3_4/5_6 Type: 20-pin (10 x 2) head

LE-575 User’s Manual 51 6 10 A.8 <Serial Port 1> Connector: COM1 Type: 9-pin D-sub male connector o

LE-575 User’s Manual 52 (This Page is Left for Blank)

LE-575 User’s Manual 53 Appendix B <Flash BIOS> B.1 <Flash Tool> The board is based on Award BIOS and

LE-575 User’s Manual 54 (This Page is Left for Blank)

LE-575 User’s Manual 55 Appendix C <System Resources> C.1 <I/O Port Address Map>

LE-575 User’s Manual 56

LE-575 User’s Manual 57 C.2 <Memory Address Map>

LE-575 User’s Manual 58 C.3 < IRQ Resources>

LE-575 User’s Manual 59 Appendix D <Programming GPIO’s> The GPIO can be programmed with the MSDOS debug pro

LE-575 User’s Manual 62.15.1 <Power Input> ...

LE-575 User’s Manual 60 Appendix E <Programming Watchdog Timer > The watchdog timer makes the sy

LE-575 User’s Manual 61 Contact Information Any advice or comment about our products and service, or anythi

LE-575 User’s Manual 7 (The Page is Left For Blank)

LE-575 User’s Manual 8Chapter 1 <Introduction> 1.1 &

LE-575 User’s Manual 9 1.2 <Product Specification> General Specification Form Factor 5.25” Embe