LN-D70 Nano-ITX Motherboard User’s Manual Edition 1.18 2015/06/26
LN-D70 User’s Manual -10- 2.2 <Jumper Location & Reference> Jumper Function JRTC CMOS Operating/Clear Setting JVLCD Pane
LN-D70 User’s Manual -11- 2.3 <Connector Reference> 2.3.1 <Internal Connectors> Connector Function Remark CPU FCBGA1170 CPU SO-DIMM
LN-D70 User’s Manual -12- CN_LPC 5 x 2-pin LPC connector JFRNT 14-pin front panel switch/indicator connector Mini-PCIE 52-pin Mini-PCIE socke
LN-D70 User’s Manual -13- 2.5 <CMOS & ATX Setup> The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inappr
LN-D70 User’s Manual -14- 2.6 <Ethernet Interface> The board integrates with Intel I210 Gigabit Ethernet, as the PCI Express bus. The Intel I210
LN-D70 User’s Manual -15- 2.7.2 <LVDS> The board provides two 40-pin LVDS connector for 18/24-bit single/dual channel panels, supports up to 192
LN-D70 User’s Manual -16- Connector: CN_INV1 and CN_INV2 Type: 5-pin LVDS Power Header Pin Description 1 +12V 2 Reserved (Note)
LN-D70 User’s Manual -17- 34 GND 33 GND 36 DDCPCLK 35 N/C 38 DDCPDATA 37 N/C 40 N/C 39 N/C To setup the LCD, you need the component below: 1. A p
LN-D70 User’s Manual -18- 4. To connect all of the devices well. After setup the devices well, you need to select the LCD panel type in the BIO
LN-D70 User’s Manual -19- Pin Signal Pin Signal 1 BR 2 BG 3 BB 4 NC 5 -CRTATCH 6 IOGND1 7 IOGND1 8 IOGND1 9 NC 10 -CRTATCH 11 NC 12 5VCDA 13
LN-D70 User’s Manual -2- Copyright Copyright 2014, all rights reserved. This document is copyrighted and all rights are reserved. The information in t
LN-D70 User’s Manual -20- z 2 DAC channels support 16/20/24-bit PCM format for 2 audio solution z Compatible with HD z Meets Microsoft WHQL/WLP 2.0
LN-D70 User’s Manual -21- 2.9 <USB Interface> LN-D70 integrates 1 x USB3.0 / 2.0 and 3 x USB2.0 , The specifications of USB3.0 are listed below
LN-D70 User’s Manual -22- Step3. enable “xHCI Mode” and push “F10” to save configuration. Restart your computer. 1 Step4. If you enable xHCI Mo
LN-D70 User’s Manual -23- Step6. Lastly, the “Setup Complete” screen appears so click “Finish” to restart your computer. The specifications of U
LN-D70 User’s Manual -24- Connector: CN_USB Type: 10-pin (2 x 5) header (pitch = 2.54mm) Pin Description Pin Description 1 VCC (5V_SB/ 5V) 2 VCC (5
LN-D70 User’s Manual -25- Warning: others cause damages 2.10 <Serial Port> The board supports four RS232 serial port and one jumper selectable
LN-D70 User’s Manual -26- Type: 20-pin (2 x 10) header pitch = 2.54x1.27mm Pin Description Pin Description 1 DCD1 2 RXD1 3 TXD1 4 DTR1 5 GND1 6 DS
LN-D70 User’s Manual -27- Jumper: JP1/JP2 (COM1/2) Type: onboard 6-pin header 2.11 <PCIE Mini Card and SIM Interface> Th
LN-D70 User’s Manual -28- 5 GND 6 SIMVPP 7 SIMDATA Jumper: JMSATA Type: onboard 3-pin header Note:SATA2-2 and mSATA can’t be enabled simu
LN-D70 User’s Manual -29- Step 2. Make sure that the cap is now at the OPEN position. Step 3. Flip the cap up for inserting a SIM card into.
LN-D70 User’s Manual -3- Printed Matters: Driver CD (Including User’s Manual) x 1 Cooler: Heat Sink:
LN-D70 User’s Manual -30- Step 6. Press down and slide the cap to the CLOSE position. Be sure that the cap is tightly held with the socket. 2.12
LN-D70 User’s Manual -31- Connector: CN_SMBUS Type: 5-pin header for SMBUS Ports 2.13 <Power Supply and Fan Interface > 2.
LN-D70 User’s Manual -32- Connector: DC_IN Type: 4-pin standard Pentium 4 additional +12V power connector Pin Description Pin Description
LN-D70 User’s Manual -33- Connector: CPUFAN Type: 4-pin fan wafer connector Pin Description Pin Description 1 Ground 2 +12V 3 Fan Speed Detecti
LN-D70 User’s Manual -34- HDLED+ 1 2 PWRLED+IDE LED HDLED- 3 4 N/C Reset+ 5 6 PWRLED- Power LED Reset Reset- 7 8 SPK+ N/C 9 10 N/C PWRBT+ 11 12 N/C P
LN-D70 User’s Manual -35- Chapter 3 <System Setup> 3.1 <Audio Configuration> The board integrates REALTEK® ALC262 code. It can support 2-c
LN-D70 User’s Manual -36- 1. Click right button on the desktop to lunch Screen resolution > Advanced settings 2. Click Graphics Properties… butto
LN-D70 User’s Manual -37- 3.3 <SATA configuration> SATA Mode: This option can let you select whether the Serial ATA hard drives would work und
LN-D70 User’s Manual -38- Chapter 4 <BIOS Setup> The motherboard uses the Phoenix BIOS for the system configuration. The Phoenix BIOS in the sin
LN-D70 User’s Manual -39- Appendix A <I/O Port Pin Assignment> A.1 <Serial ATA Port> Connector: SATA1/2 Type: 7-pin wafer connector 1 2
LN-D70 User’s Manual -4- Index Chapter 1 <Introduction> ...5 1.1 <
LN-D70 User’s Manual -40- Appendix B <Flash BIOS> B.1 <Flash Tool> The board is based on Phoenix BIOS and can be updated easily by the BIO
LN-D70 User’s Manual -41- 4. Type the ” fpt64.efi -y -f xxx.bin” command to start flash BIOS processes. ( xxx.bin means the BIOS file that you
LN-D70 User’s Manual -42- -o 4E F1 -o 4F xx ;if set GPIO’s as output,in this register its value can be set Optional : -o 4E F2 -o 4F x
LN-D70 User’s Manual -43- -O 4E 07 Logic Device Enable -O 4F 08 -O 4E 30 WDT Enable -O 4F 01 -O 4E F0 Set as Second* -O 4F 00 -O 4E F1 -O 4
LN-D70 User’s Manual -5- 3.1 <Audio Configuration>... 35 3.2 <Di
LN-D70 User’s Manual -6- processing, audio with digital signal processing, multiple storage types, and legacy embedded I/O. Provides interface expansi
LN-D70 User’s Manual -7- Internal I/O Port 4 x RS232, 1 x GPIO, 1 x Audio connector, 1 x SMBUS connector, 1 x CRT, 2 x LVDS, 1 x LPC, 2 x USB 2.0 and
LN-D70 User’s Manual -8- 1.3 <Mechanical Drawing>
LN-D70 User’s Manual -9- 1.4 <Block Diagram> Chapter 2 <Hardware Setup> 2.1 <Connector Location>
Kommentare zu diesen Handbüchern