Commell LV-67M Bedienungsanleitung

LV-67M Mini-ITX Motherboard User’s Manual Edition 1.7 2015/08/13

LV-67M User’s Manual -9- 2.1.1 <Internal connectors list> Connector Function SO-DIMM1/2 204-pin DDR3 SO-DIMM slot SATA3-1/2/3/4 7-pin Serial AT

LV-67M User’s Manual -10- 2.2 <Jumper Location and Reference> 2.2.1 <Jumper list>

LV-67M User’s Manual -11- 2.3 <Installing the Memory> In the process, the board must

LV-67M User’s Manual -12- 2.4 <Clear CMOS and Power on type selection> JRTC: Clear CMOS data jumper Jumper settings Function

LV-67M User’s Manual -13- 2.5 <I/O interface> 2.5.1 <Serial ATA inte

LV-67M User’s Manual -14- At boot time, press <CTRL + I> to enter the RAID configuration menu. If this screen stop time is too short, it can

LV-67M User’s Manual -15- 2.5.2 <Ethernet interface> The board Integrated I210-AT and I217-LM Gigabit Ethernet which supports WOL on rear I/O.

LV-67M User’s Manual -16- CN_CRT: VGA 16-pin header (Pitch 2.00mm) Pin Signal Pin Signal 1 RED 2 GREEN 3 BLUE 4 Key 5 DETECT 6 GND

LV-67M User’s Manual -17- CN_LVDS: LVDS 40-pin connector (Model: HIROSE DF13-40DP-1.25V compatible) Pin Signal Pin Signal 2 Set by JVLCD 1 Set by JV

LV-67M User’s Manual -18- 2.5.4 <Audio interface> CDIN: CD-ROM audio input 4-pin header (Pitch 2.54mm) Pin Signal 1 CD_L 2 GND

LV-67M User’s Manual -1- Copyright Copyright 2013, all rights reserved. This document is copyrighted and all rights are reserved. The information

LV-67M User’s Manual -19- 2.5.5 <USB interface> USB3.0-2 USB3.0-1 JVUSB 1 6 CN_USB3 1 20 Type: USB3.0, 5V/5VSB CN_

LV-67M User’s Manual -20- CN_USB3: Front panel USB3.0 20-pin header (Pitch 2.00mm) Pin Signal Pin Signal 20 Key 1 Set by JVUSB 19 Set by JVUSB 2 SSR

LV-67M User’s Manual -21- 2.5.6 <Serial Port interface> COM1 COM2 JCSEL2 1 8 JCSEL1 1 12 JP2 JP1 1 1 6 6 COM5/6 1

LV-67M User’s Manual -22- COM1: RS232 DB9 connector Pin Signal Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 Set by JP1 COM2: RS23

LV-67M User’s Manual -23- COM5/6: COM 20-pin header (Pitch 2.54 x 1.27mm) Pin Signal Pin Signal 1 DCD1 2 RXD1 3 TXD1 4 DTR1 5 GND 6 DSR1 7 RTS1 8 CTS

LV-67M User’s Manual -24- 2.5.7 <Expansion slot> MINI_CARD1 and MINI_CARD2 have do some special design to compatible our mini-PCI

LV-67M User’s Manual -25- 2.5.8 <Front panel switch and indicator> JFRNT: Front panel switch and indicator 14-pin header (Pitch 2

LV-67M User’s Manual -26- 2.5.9 <GPIO and Other interface> When using GPIO function, please note: As Output: Open-drain, most applic

LV-67M User’s Manual -27- CN_LPC: LPC 12-pin header (Pitch 2.00mm) Pin Signal Pin Signal 1 CLK 2 RST 3 -LFRAME 4 LAD3 5 LAD2 6 LAD1 7 LAD0 8 3.3V 9

LV-67M User’s Manual -28- 2.6 <Power supply> 2.6.1 <Power input>

LV-67M User’s Manual -2- Packing List: Please check the package content before you starting using the board. Optional: 1 x

LV-67M User’s Manual -29- 2.6.1 <Power output> It is supply to the HDD, CD-ROM or other device. If using DC_IN as input, that ATX will as outpu

LV-67M User’s Manual -30- Appendix A <Flash BIOS> A.1 <Flash tool> The board is based on Phoenix BIOS and can be up

LV-67M User’s Manual -31- Appendix B <Programmable GPIO > The GPIO’ can be programmed with the MS-DOS debug program using simple I

LV-67M User’s Manual -32- Appendix C <Programmable Watch Dog Timer> Timeout value range 1 to 255 Minute and Second Program sample

LV-67M User’s Manual -33- Contact information Any advice or comment about our products and service, or anything we can he

LV-67M User’s Manual -3- Index Chapter 1 <Introduction>... 4 1.1 <Product Overvi

LV-67M User’s Manual -4- Chapter 1 <Introduction> 1.1 <Product Overview> LV-67M is Mini-ITX Motherboard which supports 4th Generation I

LV-67M User’s Manual -5- 1.2 <Product Specification> System Processor 4th Gen Intel

LV-67M User’s Manual -6- 1.3 <Mechanical Drawing>

LV-67M User’s Manual -7- 1.4 <Block Diagram> CPU 4th Gen

LV-67M User’s Manual -8- Chapter 2 <Hardware setup> 2.1 <Connector Location and Reference>